PiZ-EzConnect Kit - Raspberry Pi 2 / Pi 3 / Pi Zero / Pi W GPIO Connector Kit Soldering Required
PiZ-EzConnect Kit - Raspberry Pi 2 / Pi 3 / Pi Zero / Pi W GPIO Connector Kit Soldering RequiredCentral Item #: DIYPIEZCO03RMfg.Part #: PiZ-EzConnect Kit
Online (2 - 7 days)
See Store Inventory >
*Disclaimer: Inventory is not updated in real-time. Thus, our inventory is not guaranteed to be 100% accurate. Please call your local Central Computers for assistance or verification. Inventory can be transferred between stores or special ordered for your convenience.

PiZ-EzConnect KIT allows you to customize and build your own GPIO connector for a Raspberry Pi or a Pi-clone (e.g. Asus Tinker, PiOrange etc.) All 40 pins used by the Raspberry Pi are exposed. Soldering is required.

KIT includes:

• Twelve, two port terminal blocks
• Two three port terminal blocks
• One 2×20 male header pins for Raspberry Pi without a male header
(e.g. Pi Zero or Pi Zero W)
• One Pi-EzConnect board
• One Pi male/female header pin
• One plastic box for all components

Using a PiZ-EzConnect board, it is possible to connect multiple sensors and other electronic devices / components to multiple GPIOs on a Raspberry Pi. PiZ-EzConnect-KIT makes it possible to customize it to suite your needs. With PiZ-EzConnect-KIT, you can leverage the full capability of a Raspberry Pi. Soldering is required.
PiZ-EzConnect pinout 40-pin header


  • Kit to build your own GPIO connector for a Raspberry Pi.
  • Soldering required.
  • Includes necessary headers for the Raspberry Pi as well as header for connecting as a HAT.
  • All Pins are clearly marked.
  • Can be used with Raspberry Pi Clones to other flat ribbon cables for prototyping.

Recommended Peripherals
The following peripherals are recommended.

PiZ-UpTime: UPS for a Pi using one Li-Ion 14500 battery, ideal for Pi Zero. UPS 5V via header or USB Power out. A micro-USB to micro-USB cable is provided for Pi Zeros which do not have the header installed.

Pi-UpTimeUPS: UPS for Pi-2 or Pi-3 using one/two 18650 batteries. Provides UPS 3.3V and 5V. Includes reset switch and provision for external reset switch. Pi-BB: Bread board with 300 connect points. Use this board to add other breakout boards with the Pi.

Pi-BB-RPS: Dual DC RPS-power breadboard, including 7-24V and USB power. 5V and 3.3V generated on board. Dual power provides Redundant Power Supply (RPS). Combine RPS with UPS power by connecting the Power out port on the Pi-BB-RPS to the power in port on Pi-UpTimeUPS. Also use the bread board for connecting other breakout ports. Use available 7V to 24V power to power the whole system. Use the over 240 connection points with breakout boards such as a Real-Time-Clock for off-grid uses.

Pi-BB: Bread board with 300 connect points. Power Pi and electronics. 5V and 3.3V Power bus is provided. Use the over 300 connection points with breakout boards such as a Real-Time-Clock for off-grid uses.

Pi-16ADC for 16 bit, 16 channel Analog to digital converter board for attaching analog sensors or monitoring other capabilities on the Raspberry Pi.

Pi-EzConnect: Secure GPIO connections for Pi-2 and Pi-3.

PiZ-EzConnect: Secure GPIO connections for Pi Zero. Can also be used with Pi-2 and Pi-3. Small compact Pi Zero format.

PiZ-EzConnect KIT: Build your own connector for Pi Zero or Pi-2, Pi-3 using PiZ-EzConnect board. Soldering required.

Pi Models Supported

Supported Pi ModelsBy default, we ship the larger, 40 pin connectors which works with the Raspberry Pi+ (models A+, B+, Pi-2 and Pi-3, and other vendors adhering to the HAT standard). Pi-Zero is also supported, as long as a 40 pin header is soldered onto the Pi-Zero. The mounting holes for the standoff for Pi-zero are such that only two standoffs can be connected.

Older models of the Raspberry Pi with a 26 pin header are not supported

Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.