Pi-16ADC 16 Channel/Bit Analog to Digital Converter (ADC) for Raspberry Pi
Pi-16ADC 16 Channel/Bit Analog to Digital Converter (ADC) for Raspberry PiCentral Item #: DIYPI16AD01RMfg.Part #: Pi-16ADC
$33.95 
Online (2 - 7 days)
In-Store
See Store Inventory >
*Disclaimer: Inventory is not updated in real-time. Thus, our inventory is not guaranteed to be 100% accurate. Please call your local Central Computers for assistance or verification. Inventory can be transferred between stores or special ordered for your convenience.
Qty:    

Pi-16ADC is a HAT or board designed for a Raspberry Pi. Pi-16ADC adds sixteen (16) Analog to Digital Converter (ADC) ports. These ports are ideally suited to collect data from analog sensors or other analog devices several times a second. Data resolution for all 16 ports is 16 bits! Sample code in Python with a detailed user manual makes it easy to connect board to a Raspberry Pi. Pi-16ADC adds analog capability to a Raspberry Pi. All communications are over an I2C address if needed. Analog connections are solder-less and additional solder points are provided per channel along with the solderless connections. 


Features

  • 16 single ended or 8 Differential Analog to Digital Conversion (ADC) ports.
  • 16-bit conversion or 39 μV sensitivity.
  • 50/60 Hz and other noise rejection.
  • Easy to connect terminal blocks for all ports.
  • Solder points for each channel.
  • Sample Python code for ADC use.
  • Selectable I2C addresses.
  • Stack boards for additional ADC ports.
  • Low power consumption.

Recommended Peripherals
The following peripherals are recommended.

PiZ-UpTime: UPS for a Pi using one Li-Ion 14500 battery, ideal for Pi Zero. UPS 5V via header or USB Power out. A micro-USB to micro-USB cable is provided for Pi Zeros which do not have the header installed.

Pi-UpTimeUPS: UPS for Pi-2 or Pi-3 using one/two 18650 batteries. Provides UPS 3.3V and 5V. Includes reset switch and provision for external reset switch. Pi-BB: Bread board with 300 connect points. Use this board to add other breakout boards with the Pi.

Pi-BB-RPS: Dual DC RPS-power breadboard, including 7-24V and USB power. 5V and 3.3V generated on board. Dual power provides Redundant Power Supply (RPS). Combine RPS with UPS power by connecting the Power out port on the Pi-BB-RPS to the power in port on Pi-UpTimeUPS. Also use the bread board for connecting other breakout ports. Use available 7V to 24V power to power the whole system. Use the over 240 connection points with breakout boards such as a Real-Time-Clock for off-grid uses.

Pi-BB: Bread board with 300 connect points. Power Pi and electronics. 5V and 3.3V Power bus is provided. Use the over 300 connection points with breakout boards such as a Real-Time-Clock for off-grid uses.

Pi-16ADC for 16 bit, 16 channel Analog to digital converter board for attaching analog sensors or monitoring other capabilities on the Raspberry Pi.

Pi-EzConnect: Secure GPIO connections for Pi-2 and Pi-3.

PiZ-EzConnect: Secure GPIO connections for Pi Zero. Can also be used with Pi-2 and Pi-3. Small compact Pi Zero format.

PiZ-EzConnect KIT: Build your own connector for Pi Zero or Pi-2, Pi-3 using PiZ-EzConnect board. Soldering required.

Pi Models Supported
Supported Pi ModelsBy default, we ship the larger, 40 pin connectors which works with the Raspberry Pi+ (models A+, B+, Pi-2 and Pi-3, and other vendors adhering to the HAT standard). Pi-Zero is also supported, as long as a 40 pin header is soldered onto the Pi-Zero. The mounting holes for the standoff for Pi-zero are such that only two standoffs can be connected.

Older models of the Raspberry Pi with a 26 pin header are not supported

Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.