Linksy Wireless-N Access Point with Power Over Ethernet
With the growth in high bandwidth applications, such as storage and video in the work place, network performance is essential. Wireless technology is no longer lagging behind wired performance. The introduction of the Linksys Business Series WAP4400N wireless Access Point answers the growing business' need for access, speed and security.

The Access Point uses the very latest wireless networking technology, Wireless-N (draft 802.11n). By overlaying the signals of multiple radios, Wireless-N's ¿Multiple In, Multiple Out¿ (MIMO) technology multiplies the effective data rate. Unlike ordinary wireless networking technologies that are confused by signal reflections, MIMO actually uses these reflections to increase the range and reduce ¿dead spots¿ in the wireless coverage area.

The Linksys Wireless-N Access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet support makes it easy to install -- you can mount the Access Point anywhere, even without ready access to a power plug. With appropriate Power Over Ethernet support at the other end, you only need to run one cable to the Access Point to deliver both data and power. Of course, you can also use the included AC adapter if your installation point has power available nearby.

To protect your data and privacy, the Wireless-G Exterior Access Point supports both Wired Equivalent Privacy (WEP) and the industrial-strength wireless security of Wi-Fi Protected Access¿ (WPA), encoding all your wireless transmissions with powerful encryption. The MAC Address filter lets you decide exactly who has access to your wireless network, and advanced logging keeps you appraised. Configuration is a snap with the web browser-based configuration utility.

The Linksys Wireless-N Access Point with Power Over Ethernet is the best way to add wireless access to your existing business network.

Specifications
	Device Type	Wireless Access Point
	Form Factor	Desktop
	Wireless Network Standards	IEEE 802.11b IEEE 802.11g IEEE 802.11n
	Wireless Data Transfer Rates	300 Mbps
	Security Protocols	64-bit WEP 128-bit WEP WPA-PSK WPA-Personal WPA-Enterprise
	Networking Standards	IEEE 802.3 Ethernet 10Base-T IEEE 802.3u Ethernet 100Base-TX
	Firewall Features	MAC Address Filtering
	Management	Web Based
	10/100/1000 Mbps Ports	1
	Antenna Type	Omni-Directional
	Ethernet	CAT5 CAT6

Features

• Draft 802.11n wireless networking can provide speeds greater than 100Mbps
• Full backwards compatiblity for 802.11b and 802.11g
• Easy installation and configuration web Interface Supports WEP, WPA-PSK, WPA2-PSK, WPA2-ENT, WPAENT authentication (802.11i ready)
• Adjustable Dipole antennaes with MIMO 2x3 Diversity
• Gigabit Ethernet LAN interface
• Supports Power over
• Ethernet (PoE) or external DC power
• Supports SNMP and intuitive web-based interface
• WMM wireless QoS support - upgradeable to 802.11e